5986

STT-RAM for Shared Memory in GPUs

Prateeksha Satyamoorthy
School of Engineering and Applied Science, University of Virginia
University of Virginia, 2011

@phdthesis{satyamoorthy2011stt,

   title={STT-RAM for Shared Memory in GPUs},

   author={Satyamoorthy, P.},

   year={2011},

   school={University of Virginia}

}

Download Download (PDF)   View View   Source Source   

1747

views

In the context of massively parallel processors such as Graphics Processing Units (GPUs), an emerging non-volatile memory – STT-RAM – provides substantial power, area savings, and increased capacity compared to the conventionally used SRAM. The use of highly dense, low static power STT-RAM in processors that run just few threads of execution does not seem attractive because of several times slower write latency, which can relatively impair the performance of the system. However, hundreds to thousands of threads executing in parallel in high-throughput GPUs hide the long write latency of STT-RAM through fine-grained multithreading. In this thesis, evaluation of possibility of STT-RAM for the shared memory in GPUs was done. Performance, energy and area were evaluated across various configurations of shared memory capacity, banks and ports across a set of benchmarks displaying different characteristics. Results show performance degrades only up to 2% on average for an STT-RAM write latency, which is four times that of SRAM write latency. Performance is even increased by 20% on average when the denser STT-RAM is used to increase shared memory capacity, banks and ports. The energy savings are up to 17% and area savings up to 50%. The evaluation helps understand the trade-offs involved in the use of STT-RAM in GPUs. In the process, a few configurations were identified which encourage their use. To better understand the low impact of high shared memory latency on GPU’s performance, a theoretical analysis was done.
No votes yet.
Please wait...

* * *

* * *

HGPU group © 2010-2024 hgpu.org

All rights belong to the respective authors

Contact us: